Moze Breeze Two Shisha - Wavy Yellow

Some pipes blend into the table. This one owns it. The Moze Breeze Two in Wavy Yellow is wrapped in a bright, poured-resin sleeve — a sunny, high-energy yellow wave that turns the shisha into the centrepiece rather than the backdrop. Underneath the statement finish sits a patented variable blow-out system that lets you choose where the smoke clears before you pack a bowl, on a stainless steel build standing around 40 cm without the bowl. It is, simply, the most confident colour in the range.

Variable Blow-Out System · Single Hose Setup · Melbourne Stocked

Moze Breeze Two Wavy Yellow Shisha — Bold Sleeve, Set Your Purge

Why This Shisha

• A vivid Wavy Yellow statement sleeve in poured acrylic/epoxy resin — a bright, flowing wave that makes this the boldest piece on the table, and one you can swap out later if you want a new look.
• Patented variable blow-out is the real engineering story: configure the purge in multiple modes — classic from the base, below the coal plate, or top-purge above the bowl — and build the draw your way before the first session.
• Two coal plates in the box (one standard, one for the top-purge mode) plus a 16 cm coal-plate diameter give you a stable, generous platform for managing heat.
• Stainless steel core, POM base and epoxy/acrylic resin make for a solid, well-damped build — substantial in the hand without being unwieldy at roughly 40 cm tall.
• Two-piece stainless steel mouthpiece included from the factory, with a colour-matched resin sleeve — no separate mouthpiece purchase to think about.

Fit & Compatibility

• Single-hose shisha — one hose connection. A hose is not included; a silicone hose is the natural pairing.
• Takes a standard clay or phunnel bowl via the included bowl adapter. A bowl is not included and is needed to smoke.
• Factory two-piece stainless steel mouthpiece included, so the pipe arrives ready to draw once you add a bowl and hose.

Care & Maintenance

• Rinse the glass vessel and stainless steel parts with warm water after each session; dry the metalwork to keep it bright.
• Wipe the resin sleeve with a soft, damp cloth — avoid abrasive pads or harsh solvents that can dull the finish.
• Let all components dry fully before reassembly and storage to keep seals fresh.
• Store the pipe upright and the silicone seals loose rather than compressed, so they keep their shape.

In the Box

• 1 × Glass vessel / base
• 1 × Stainless steel diffuser + dip tube
• 1 × POM base
• 1 × Stainless steel core
• 1 × Wavy Yellow acrylic/epoxy resin sleeve
• 1 × Stainless steel blow-out element
• 2 × Stainless steel coal plates (one standard, one for top-purge)
• 1 × Bowl adapter
• 1 × Two-piece stainless steel mouthpiece + resin sleeve
• Silicone seals (two sizes) + bowl seal
• 1 × Tray

Please note: No hose and no clay/phunnel bowl are included — both are needed to smoke and are easy add-ons.

FAQ

How bold is the Wavy Yellow finish in person?

It's a bright, vivid yellow with a flowing poured-resin wave, designed to stand out — it reads as a deliberate statement colour rather than a subtle tone. Because each sleeve is individually poured, the exact pattern is unique to your piece.

What does the variable blow-out system actually do?

It decides which way the pipe purges — clearing at the base, beneath the coal plate, or over the bowl. You lock that choice in during assembly, so the draw is already set to your liking before the very first bowl.

Does it come with a hose and bowl?

The factory mouthpiece comes in the box, but you'll add a hose and a clay or phunnel bowl yourself — both are required to smoke. A standard bowl seats on the included adapter.

Are the small air bubbles in the resin a fault?

Not at all. Because each glass and resin part is made by hand, faint air inclusions or small differences from one piece to the next are simply hallmarks of a handcrafted finish rather than flaws.